NSN 5306-01-552-4342
Coaxial Connector
Between 2.072 inches and 2.097 inches fastener length, 0.748 inches head diameter, between 0.6100 inches and 0.6542 inches grip diameter, grip length: between 2.365 inches and 2.380 inches .
Manufacturer part number TLH110-7-38 for national stock number 5306015524342.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-552-4342.
-
MPN or Model
TLH110-7-38
-
Thread Length
Between 2.265 inches and 2.480 inches -
Fastener Length
Between 2.072 inches and 2.097 inches -
Head Diameter
0.748 inches -
Grip Diameter
Between 0.6100 inches and 0.6542 inches -
Grip Length
Between 2.365 inches and 2.380 inches -
Part Name Assigned By Controlling Agency
Bolt-taper, shank, shear 100 degree head type, oversize
More from these suppliers
- 5305-00-333-6292 MPN LS15264V3-32Machine Screw
- 5305-01-136-5740 MPN NAS1102-06-30Machine Screw
- 5305-01-207-1688 MPN PBF1375-2108Machine Screw
- 5305-01-212-2202 MPN PBF1378-2182Machine Screw
- 5305-01-255-0095 MPN 51B334-6YClose Tolerance Screw
- 5305-01-381-5754 MPN PBF1417-5-39Close Tolerance Screw
- 5305-01-412-1937 MPN TX1026D3-3FClose Tolerance Screw
- 5305-01-412-5360 MPN LD111-0044-0815Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-552-4342 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
TLH110-7-38 | Sps Technologies, Llc |
TLH110-7-38 | Reid Products Inc. |