NSN 5306-01-552-4343
Coaxial Connector
Between 2.072 inches and 2.097 inches fastener length, 0.748 inches head diameter, between 0.2681 inches and 0.3014 inches grip diameter, grip length: between 1.740 inches and 1.855 inches .
Manufacturer part number TLH110-7-28 for national stock number 5306015524343.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-552-4343.
-
MPN or Model
TLH110-7-28
-
Thread Length
Between 1.640 inches and 1.855 inches -
Fastener Length
Between 2.072 inches and 2.097 inches -
Head Diameter
0.748 inches -
Grip Diameter
Between 0.2681 inches and 0.3014 inches -
Grip Length
Between 1.740 inches and 1.855 inches -
Part Name Assigned By Controlling Agency
Bolt-taper, shank, shear 100 degree head type, oversize
More from these suppliers
- 5305-00-310-5469 MPN 965811-263CSocket Head Cap Screw
- 5305-00-929-1757 MPN NAS1101-3H14Machine Screw
- 5305-01-164-1127 MPN BACB30LU14-46Close Tolerance Screw
- 5305-01-235-3592 MPN 9132M23P05Machine Screw
- 5305-01-338-4569 MPN BACS12GU3K26Machine Screw
- 5305-01-358-4865 MPN PBF1380-0536Machine Screw
- 5305-01-431-9979 MPN PBF1355V3-8HClose Tolerance Screw
- 5305-01-463-1126 MPN TX1026V3-28AClose Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-552-4343 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
TLH110-7-28 | Sps Technologies, Llc |
TLH110-7-28 | Reid Products Inc. |