NSN 5306-01-552-4348
Coaxial Connector
Between 2.818 inches and 2.843 inches fastener length, 1.018 inches head diameter, 0.140 inches head height, grip diameter: between 0.4636 inches and 0.5091 inches .
Manufacturer part number TLH110-9-38 for national stock number 5306015524348.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-552-4348.
-
MPN or Model
TLH110-9-38
-
Thread Length
Between 2.225 inches and 2.520 inches -
Fastener Length
Between 2.818 inches and 2.843 inches -
Head Diameter
1.018 inches -
Head Height
0.140 inches -
Grip Diameter
Between 0.4636 inches and 0.5091 inches -
Thread Diameter
0.8625 inches -
Grip Length
Between 2.365 inches and 2.380 inches -
Thready Qty Per Inch (tpi)
18 -
Part Name Assigned By Controlling Agency
Bolt-taper, shank, shear, 100 degree head type, oversize
More from these suppliers
- 5305-00-805-3839 MPN 51B221-9HMachine Screw
- 5305-01-032-3465 MPN LS15264-06-7Machine Screw
- 5305-01-231-7422 MPN ST3M733-6L-9Close Tolerance Screw
- 5305-01-409-1155 MPN C7984-3-6RClose Tolerance Screw
- 5305-01-478-2839 MPN TX1027V3-20AClose Tolerance Screw
- 5305-01-494-0615 MPN TX1027C4D11AClose Tolerance Screw
- 5305-01-667-2917 MPN BACN30NN3K4XClose Tolerance Screw
- 5306-00-324-7117 MPN PBF1263-5-20Shoulder Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-552-4348 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
TLH110-9-38 | Sps Technologies, Llc |
TLH110-9-38 | Reid Products Inc. |