NSN 5306-01-552-4349
Coaxial Connector
Between 2.646 inches and 2.671 inches fastener length, 1.018 inches head diameter, 0.140 inches head height, grip diameter: between 0.2681 inches and 0.2884 inches .
Manufacturer part number TLH110-9-36 for national stock number 5306015524349.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-552-4349.
-
MPN or Model
TLH110-9-36
-
Thread Length
Between 2.075 inches and 2.370 inches -
Fastener Length
Between 2.646 inches and 2.671 inches -
Head Diameter
1.018 inches -
Head Height
0.140 inches -
Grip Diameter
Between 0.2681 inches and 0.2884 inches -
Thread Diameter
0.8625 inches -
Grip Length
Between 2.215 inches and 2.230 inches -
Thready Qty Per Inch (tpi)
18 -
Part Name Assigned By Controlling Agency
Bolt-taper, shank, shear, 100 degree head type, oversize
More from these suppliers
- 5305-00-364-7307 MPN LS15276V3-16Machine Screw
- 5305-00-802-0573 MPN 51B221-22Machine Screw
- 5305-01-119-3611 MPN NAS1101E6-18Machine Screw
- 5305-01-205-9169 MPN HT4069-3-5AClose Tolerance Screw
- 5305-01-276-9471 MPN BACB30LH3-13Close Tolerance Screw
- 5305-01-350-4183 MPN PBF1476-4D13PClose Tolerance Screw
- 5305-01-435-3851 MPN BACB30LU7-33Close Tolerance Screw
- 5305-01-435-6611 MPN BACB30LU9-26Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-552-4349 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
TLH110-9-36 | Sps Technologies, Llc |
TLH110-9-36 | Reid Products Inc. |