NSN 5306-01-552-4351
Coaxial Connector
Between 2.700 inches and 2.725 inches fastener length, 0.824 inches head diameter, 0.110 inches head height, grip diameter: between 0.6152 inches and 0.6542 inches .
Manufacturer part number TLH110-8-34 for national stock number 5306015524351.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-552-4351.
-
MPN or Model
TLH110-8-34
-
Thread Length
Between 2.005 inches and 2.240 inches -
Fastener Length
Between 2.700 inches and 2.725 inches -
Head Diameter
0.824 inches -
Head Height
0.110 inches -
Grip Diameter
Between 0.6152 inches and 0.6542 inches -
Thread Diameter
0.500 inches -
Grip Length
Between 2.115 inches and 2.130 inches -
Thready Qty Per Inch (tpi)
20 -
Part Name Assigned By Controlling Agency
Bolt-taper, shank, shear, 100 degree head type, oversize
More from these suppliers
- 5305-00-508-5088 MPN LS15267V3-36Machine Screw
- 5305-00-680-5923 MPN BACB30LU4-17Close Tolerance Screw
- 5305-00-820-2383 MPN NAS1101-3H12Machine Screw
- 5305-01-161-6165 MPN LE111-0041-2404Close Tolerance Screw
- 5305-01-216-6604 MPN PBF1375-0021Machine Screw
- 5305-01-255-4607 MPN PBF1320-6-9Machine Screw
- 5305-01-520-9391 MPN 120-265E3-3Close Tolerance Screw
- 5305-01-584-7900 MPN 120-225C4R24Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-552-4351 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
TLH110-8-34 | Sps Technologies, Llc |
TLH110-8-34 | Reid Products Inc. |