NSN 5306-01-552-4353
Coaxial Connector
Between 3.350 inches and 3.375 inches fastener length, 1.018 inches head diameter, 0.140 inches head height, grip diameter: between 0.5260 inches and 0.5817 inches .
Manufacturer part number TLH110-9-46 for national stock number 5306015524353.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-552-4353.
-
MPN or Model
TLH110-9-46
-
Thread Length
Between 2.725 inches and 3.020 inches -
Fastener Length
Between 3.350 inches and 3.375 inches -
Head Diameter
1.018 inches -
Head Height
0.140 inches -
Grip Diameter
Between 0.5260 inches and 0.5817 inches -
Thread Diameter
0.8625 inches -
Grip Length
Between 2.865 inches and 2.880 inches -
Thready Qty Per Inch (tpi)
18 -
Part Name Assigned By Controlling Agency
Bolt-taper, shank, shear, 100 degree head type, oversize
More from these suppliers
- 5305-00-243-8319 MPN NAS1101E4-6Machine Screw
- 5305-00-288-2455 MPN NAS1102-04-26Machine Screw
- 5305-00-308-1549 MPN PBF1069-158CSocket Head Cap Screw
- 5305-00-802-0574 MPN 51B221-4Close Tolerance Screw
- 5305-01-025-6960 MPN HT4049-4D11Close Tolerance Screw
- 5305-01-044-0725 MPN PBF1068-210CMachine Screw
- 5305-01-045-2903 MPN BACB30LU5-21Close Tolerance Screw
- 5305-01-168-9201 MPN LD111-0047-0303Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-552-4353 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
TLH110-9-46 | Sps Technologies, Llc |
TLH110-9-46 | Reid Products Inc. |