NSN 5306-01-552-6487
Coaxial Connector
Between 1.322 inches and 1.337 inches fastener length, flat chamfer head style, 0.522 inches head diameter, head height: 0.070 inches .
Manufacturer part number TLV110-5-16 for national stock number 5306015526487.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-552-6487.
-
MPN or Model
TLV110-5-16
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
Thread Length
Between 0.920 inches and 1.075 inches -
Fastener Length
Between 1.322 inches and 1.337 inches -
Head Style
Flat chamfer -
Head Diameter
0.522 inches -
Head Height
0.070 inches -
Grip Diameter
Between 0.2707 inches and 0.2884 inches -
Thread Diameter
0.3125 inches -
Grip Length
Between 0.990 inches and 1.005 inches -
Thready Qty Per Inch (tpi)
24 -
Part Name Assigned By Controlling Agency
Bolt-taper, shank, shear, 100 degree head type, oversize -
Material
Titanium alloy -
Material Specification
Ams4928 assn standard 1st material response
More from these suppliers
- 5305-00-803-9617 MPN 51B221-13Close Tolerance Screw
- 5305-01-054-4637 MPN BACB30LK3-3Close Tolerance Screw
- 5305-01-055-3750 MPN NAS1101-06-22Machine Screw
- 5305-01-112-7856 MPN NAS1101E04H4Machine Screw
- 5305-01-330-7579 MPN PBF1417-4-28Close Tolerance Screw
- 5305-01-435-3891 MPN BACB30LU7-43Close Tolerance Screw
- 5305-01-435-6321 MPN BACB30LU9-22Close Tolerance Screw
- 5305-01-435-6369 MPN BACB30LU9-23Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-552-6487 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
TLV110-5-16 | Sps Technologies, Llc |
TLV110-5-16 | Reid Products Inc. |