NSN 5306-01-557-7520
Coaxial Connector
2.853 inches fastener length, dished hexagon head style, 0.375 inches head height, width between flats: 1.052 inches .
Manufacturer part number NAS6712-29 for national stock number 5306015577520.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-557-7520.
-
MPN or Model
NAS6712-29
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.041 inches -
Fastener Length
2.853 inches -
Head Style
Dished hexagon -
Head Height
0.375 inches -
Width Between Flats
1.052 inches -
Grip Diameter
0.749 inches -
End Application
Ac-130u -
Thread Diameter
0.750 inches -
Grip Length
1.816 inches -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416 type 2 cl2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-764-1028 MPN NAS707S4Stud Terminal
- 5305-00-008-5846 MPN NAS1632E26Machine Screw
- 5305-00-038-2437 MPN NAS514P832-9Machine Screw
- 5305-00-057-3663 MPN NAS1352-6LB12PSocket Head Cap Screw
- 5305-00-082-6739 MPN MS51959-111Machine Screw
- 5305-00-141-6523 MPN MS24693B50Machine Screw
- 5305-00-197-8860 MPN NAS1102-08-40Machine Screw
- 5305-00-230-4594 MPN NAS608-632H8TSocket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-557-7520 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6712-29 | National Aerospace Standards |