NSN 5306-01-558-7947
Coaxial Connector
Between 2.028 inches and 2.048 inches fastener length, dished hexagon head style, between 0.110 inches and 0.125 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number NAS6703-27 for national stock number 5306015587947.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-558-7947.
-
MPN or Model
NAS6703-27
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.345 inches -
Fastener Length
Between 2.028 inches and 2.048 inches -
Head Style
Dished hexagon -
Head Height
Between 0.110 inches and 0.125 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Grip Diameter
Between 0.189 inches and 0.190 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 1.673 inches and 1.698 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Iron alloy 660 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416. Type 2 class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-00-525-4457 MPN NAS25-4KLTrunnion Tank Strap
- 5305-00-007-6183 MPN NAS1100E04-13PMachine Screw
- 5305-00-068-0543 MPN MS24678-11CSocket Head Cap Screw
- 5305-00-100-6696 MPN NAS2805-18Close Tolerance Screw
- 5305-00-151-5680 MPN NAS1218-08-9PMachine Screw
- 5305-00-205-3674 MPN NAS1189E06P4LSocket Head Cap Screw
- 5305-00-225-8513 MPN MS90725-49Hexagon Head Cap Screw
- 5305-00-253-5608 MPN MS21318-9Drive Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-558-7947 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6703-27 | National Aerospace Standards |