NSN 5306-01-562-1670
Coaxial Connector
2.610 inches fastener length, hexagon head style, 0.250 inches head height, width between flats: between 0.741 inches and 0.752 inches .
Manufacturer part number NAS6608-30 for national stock number 5306015621670.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-562-1670.
-
MPN or Model
NAS6608-30
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.735 inches -
Fastener Length
2.610 inches -
Head Style
Hexagon -
Head Height
0.250 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
End Application
1520-01-457-5179 helicopter, cargo-transport -
Thread Diameter
0.500 inches -
Grip Length
1.875 inches -
Thready Qty Per Inch (tpi)
20 -
Part Name Assigned By Controlling Agency
Bolt, hex head -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-935-8317 MPN NAS1746-4Conductor Splice
- 5975-01-149-8889 MPN NAS1544-2A1Electrical Wall Plate
- 5940-01-425-6039 MPN NAS1063A5-434Terminal Board Marker Strip
- 5305-00-001-4781 MPN NAS1352-06-8PSocket Head Cap Screw
- 5305-00-008-9117 MPN NAS1190C04T4LSocket Head Cap Screw
- 5305-00-034-1382 MPN NAS1624C7Machine Screw
- 5305-00-051-6981 MPN MS27039DD4-28Machine Screw
- 5305-00-054-6897 MPN MS35206-335Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-562-1670 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6608-30 | National Aerospace Standards |
Stock Check
- NS: 19
- NE: 796