NSN 5306-01-562-4830
Coaxial Connector
Fillister countersunk head style, between 0.338 inches and 0.495 inches head diameter, between 0.033 inches and 0.290 inches head height, width between flats: 0.349 inches .
Manufacturer part number 111210-4 for national stock number 5306015624830.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-562-4830.
-
MPN or Model
111210-4
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
Thread Class
1a -
Thread Direction
Right-hand -
Head Style
Fillister countersunk -
Head Diameter
Between 0.338 inches and 0.495 inches -
Head Height
Between 0.033 inches and 0.290 inches -
Width Between Flats
0.349 inches -
Hole Diameter
Between 0.205 inches and 0.215 inches -
Grip Diameter
Between 0.177 inches and 0.197 inches -
Thread Diameter
0.188 inches -
Grip Length
Between 0.640 inches and 0.672 inches -
Hole Type
Drilled -
Hole Configuration Style
Round internal torx -
Countersink Angle
Between 121.0 degrees and 123.0 degrees -
Part Name Assigned By Controlling Agency
Bolt, shear, 130 degree flush head -
Material
Titanium alloy -
Thread Series Designator
Unjf
More from these suppliers
- 1560-01-606-2267 MPN CH138-4-10-2Aircraft Channel
- 1680-01-535-6803 MPN 3M1318-6-7-2Turnlock Receptacle
- 5305-00-081-6252 MPN 3MA584-19Machine Screw
- 5305-00-234-9647 MPN 55979-3-18Shoulder Screw
- 5305-00-369-1710 MPN 54291-4-7Close Tolerance Screw
- 5305-00-541-9194 MPN 106706H7-13Close Tolerance Screw
- 5305-00-541-9194 MPN 106706T7-13Close Tolerance Screw
- 5305-01-004-9496 MPN 106752-08-306Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-562-4830 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
111210-4 | Sps Technologies, Llc |