NSN 5306-01-562-7024
Coaxial Connector
2.375 inches fastener length, hexagon head style, 0.375 inches head height, width between flats: 1.064 inches .
Manufacturer part number 20-057-12S29D for national stock number 5306015627024.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-562-7024.
-
MPN or Model
20-057-12S29D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.375 inches -
Fastener Length
2.375 inches -
Head Style
Hexagon -
Head Height
0.375 inches -
Width Between Flats
1.064 inches -
Grip Diameter
0.749 inches -
End Application
V1h-1n helicopter -
Thread Diameter
0.750 inches -
Grip Length
1.812 inches -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Part Name Assigned By Controlling Agency
Bolt, shear, hex head, short thread -
Material
Steel -
Material Specification
Mil-b-7838 military specification single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type ii. Class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-595-5986 MPN GB510DC4C5DClose Tolerance Screw
- 5305-01-048-1136 MPN PBF1069-108CSocket Head Cap Screw
- 5305-01-054-6250 MPN C9535-7-35Close Tolerance Screw
- 5305-01-056-4220 MPN C7986-10-52Close Tolerance Screw
- 5305-01-161-2575 MPN PBF1355A08-3Machine Screw
- 5305-01-338-1315 MPN BACS12GU3K21Machine Screw
- 5305-01-338-1320 MPN BACS12GU3K16Machine Screw
- 5305-01-398-4077 MPN PBF1510-4-9Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-562-7024 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
20-057-12S29D | Bell Helicopter Textron Inc. |
20-057-12S29D | Sps Technologies, Llc |
20-057-12S29D | Sps Technologies, Llc |