NSN 5306-01-563-4435
Coaxial Connector
1.266 inches fastener length, dished hexagon head style, between 0.188 inches and 0.203 inches head height, width between flats: between 0.554 inches and 0.564 inches .
Manufacturer part number NAS6706HU11 for national stock number 5306015634435.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-563-4435.
-
MPN or Model
NAS6706HU11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.578 inches -
Fastener Length
1.266 inches -
Head Style
Dished hexagon -
Head Height
Between 0.188 inches and 0.203 inches -
Width Between Flats
Between 0.554 inches and 0.564 inches -
Grip Diameter
0.374 inches -
End Application
C-135 aircraft -
Thread Diameter
0.375 inches -
Grip Length
0.688 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Stainless steel -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-681-9573 MPN 191-10Terminal Board
- 5305-00-007-6174 MPN NAS1100E00-10Machine Screw
- 5305-00-052-6887 MPN MS35198-48Machine Screw
- 5305-00-052-6906 MPN MS24627-35Tapping Screw
- 5305-00-053-8078 MPN MS24677-105Socket Head Cap Screw
- 5305-00-058-7611 MPN MS24694S131Machine Screw
- 5305-00-058-9362 MPN MS51977-19Setscrew
- 5305-00-060-7071 MPN NAS1190-3P8NSocket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-563-4435 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6706HU11 | National Aerospace Standards |