NSN 5306-01-564-1628
Coaxial Connector
2.125 inches fastener length, double hexagon extended washer head style, 0.388 inches head height, width between flats: 0.491 inches .
Manufacturer part number 79033-6-24 for national stock number 5306015641628.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-564-1628.
-
MPN or Model
79033-6-24
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.625 inches -
Fastener Length
2.125 inches -
Head Style
Double hexagon extended washer -
Head Height
0.388 inches -
Width Between Flats
0.491 inches -
Extended Washer Diameter
0.644 inches -
Extended Washer Thickness
0.091 inches -
Grip Diameter
0.389 inches -
End Application
C-5 aircraft -
Thread Diameter
0.375 inches -
Grip Length
1.500 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Part Name Assigned By Controlling Agency
Bolt double hexagon -
Material
Steel comp 4140 -
Material Specification
Mil-s-5626 military specification single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416 type ii class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-008-5879 MPN NAS1191E04P4LHSocket Head Cap Screw
- 5305-00-205-3674 MPN NAS1189E06P4LSocket Head Cap Screw
- 5305-00-246-7449 MPN 652478-3-3Close Tolerance Screw
- 5305-00-310-5807 MPN 73573-94-4Socket Head Cap Screw
- 5305-00-318-8649 MPN 106752B06-209CMachine Screw
- 5305-00-321-9051 MPN 73573-94-4CSocket Head Cap Screw
- 5305-00-541-9033 MPN LS15234C3-1Close Tolerance Screw
- 5305-00-567-4989 MPN BACB30EL3-1Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-564-1628 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
79033-6-24 | Sps Technologies, Llc |