NSN 5306-01-566-1837
Coaxial Connector
Shear doulbe 265,100 pounds min.
Manufacturer part number NAS640-36 for national stock number 5306015661837.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-566-1837.
-
MPN or Model
NAS640-36
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.697 inches -
Fastener Length
3.947 inches -
Head Style
Double hexagon extended washer -
Head Height
1.155 inches -
Width Between Flats
1.519 inches -
Extended Washer Diameter
Between 2.115 inches and 2.125 inches -
Extended Washer Thickness
Between 0.259 inches and 0.279 inches -
Grip Diameter
Between 1.248 inches and 1.249 inches -
Thread Diameter
1.250 inches -
Grip Length
2.250 inches -
Thready Qty Per Inch (tpi)
12 -
Min. Tensile Strength (psi)
202500 pounds per square inch -
Material
Steel comp 8740 or steel comp 4340 -
Material Specification
Ams 6322 assn standard single material response or ams 6415 assn standard single material response or ams 6484 assn standard single material response or mil-s-6049 military specification single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-136-1728 MPN 39-23990-2Aircraft Structural Component Support
- 1680-00-393-9399 MPN 9-25697-5Control Lever
- 1560-00-614-6896 MPN 25-4075-1Aircraft Structural Component Support
- 1560-00-652-7608 MPN 69-21046-4Floor Hatch Latch Assembly
- 1560-00-779-3090 MPN 90-5347-526Wing Seal Assembly
- 1560-00-784-6659 MPN 34-1344-6Aircraft Access Cover
- 1560-00-829-6050 MPN 35-8271-511Aircraft Former
- 5975-00-951-9500 MPN 10-30278-513Electrical Equipment Mounting Base
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-566-1837 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS640-36 | The Boeing Company |