NSN 5306-01-566-1847
Coaxial Connector
Double shear 265,100 pounds min.
Manufacturer part number NAS640-38 for national stock number 5306015661847.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-566-1847.
-
MPN or Model
NAS640-38
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.697 inches -
Fastener Length
Between 4.057 inches and 4.087 inches -
Head Style
Double hexagon extended washer -
Head Height
Between 1.145 inches and 1.165 inches -
Width Between Flats
1.519 inches -
Extended Washer Diameter
Between 2.115 inches and 2.125 inches -
Extended Washer Thickness
Between 0.259 inches and 0.279 inches -
Grip Diameter
Between 1.248 inches and 1.249 inches -
Thread Diameter
1.250 inches -
Grip Length
Between 2.365 inches and 2.385 inches -
Thready Qty Per Inch (tpi)
12 -
Min. Tensile Strength (psi)
202500 pounds per square inch -
Material
Steel comp 4340 or steel comp 8740 -
Material Specification
Ams 6322 assn standard single material response or ams 6415 assn standard single material response or ams 6484 assn standard single material response or mil-s-6049 military specification single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-384-3924 MPN NAS1063C5TB177ATerminal Board Marker Strip
- 5305-00-001-6359 MPN NAS1352-06LB4PSocket Head Cap Screw
- 5305-00-052-4048 MPN MS3212-47Machine Screw
- 5305-00-054-8291 MPN MS21295-65Socket Head Cap Screw
- 5305-00-116-1483 MPN NAS1100E3-10Machine Screw
- 5305-00-186-9234 MPN NAS1352-02LL4PSocket Head Cap Screw
- 5305-00-206-3688 MPN MS35198-26Machine Screw
- 5305-00-225-9451 MPN MS16996-31Socket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-566-1847 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS640-38 | National Aerospace Standards |
NAS640-38 | The Boeing Company |