NSN 5306-01-567-2001
Coaxial Connector
2.455 inches fastener length, spline extended washer head style, 0.393 inches head height, extended washer diameter: 0.812 inches .
Manufacturer part number ST3M753L7H28 for national stock number 5306015672001.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-567-2001.
-
MPN or Model
ST3M753L7H28
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.705 inches -
Fastener Length
2.455 inches -
Head Style
Spline extended washer -
Head Height
0.393 inches -
Extended Washer Diameter
0.812 inches -
Extended Washer Thickness
0.063 inches -
Hole Diameter
0.055 inches -
Grip Diameter
Between 0.4365 inches and 0.4370 inches -
Head Minor Diameter
0.500 inches -
Thread Diameter
0.437 inches -
Grip Length
1.750 inches -
Hole Quantity
6 -
Hole Type
Drilled -
Features Provided
Dry film lubricant -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hole Configuration Style
Double hexagon flats -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-01-160-7561 MPN 11923-5-18Close Tolerance Screw
- 5305-01-425-0731 MPN 11931-4-22Close Tolerance Screw
- 5306-01-014-5125 MPN 11825-5-14Close Tolerance Bolt
- 5306-01-133-2194 MPN 11825-5-15Close Tolerance Bolt
- 5306-01-333-6405 MPN 11797A04D014Close Tolerance Bolt
- 5320-00-152-4455 MPN TLV210-3-4Pin-rivet
- 5320-00-152-6190 MPN TL210-3-11Pin-rivet
- 5320-00-278-0891 MPN TL130-4-15Pin-rivet
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-567-2001 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
ST3M753L7H28 | Boeing Company, The |
11829L7H28 | Reid Products Inc. |