NSN 5306-01-569-1735
Close Tolerance Hex Head Bolt
3.407 inches fastener length, dished hexagon head style, between 0.110 inches and 0.125 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number NAS6603-49 for national stock number 5306015691735.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-569-1735.
-
MPN or Model
NAS6603-49
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.345 inches -
Fastener Length
3.407 inches -
Head Style
Dished hexagon -
Head Height
Between 0.110 inches and 0.125 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Grip Diameter
Between 0.184 inches and 0.185 inches -
Thread Diameter
0.190 inches -
Grip Length
3.062 inches -
Thready Qty Per Inch (tpi)
32 -
Material
Steel comp 4140 or steel comp 4340 or steel comp e4340 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or ams 6415 assn standard 2nd material response or mil-s-5000 military specification 3rd material response or mil-s-6049 military specification 4th material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, tyii, cl2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-827-0772 MPN NAS1063A6-1Terminal Board Marker Strip
- 5305-00-008-5896 MPN NAS1102E5-10Machine Screw
- 5305-00-045-3196 MPN NAS1505-25Close Tolerance Screw
- 5305-00-053-8078 MPN MS24677-105Socket Head Cap Screw
- 5305-00-054-6651 MPN MS51957-27Machine Screw
- 5305-00-057-0514 MPN MS51958-17Machine Screw
- 5305-00-060-3834 MPN NAS608C8-16Socket Head Cap Screw
- 5305-00-147-3222 MPN MS51861-1CTapping Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-569-1735 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6603-49 | National Aerospace Standards |