NSN 5306-01-572-6839
Coaxial Connector
Between 1.877 inches and 1.907 inches fastener length, dished hexagon head style, between 0.188 inches and 0.203 inches head height, width between flats: between 0.553 inches and 0.564 inches .
Manufacturer part number NAS2816C23 for national stock number 5306015726839.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-572-6839.
-
MPN or Model
NAS2816C23
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Direction
Right-hand -
Thread Length
0.454 inches -
Fastener Length
Between 1.877 inches and 1.907 inches -
Head Style
Dished hexagon -
Head Height
Between 0.188 inches and 0.203 inches -
Width Between Flats
Between 0.553 inches and 0.564 inches -
Grip Diameter
0.374 inches -
Grip Length
Between 1.428 inches and 1.448 inches -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard single material response or ams5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-01-577-3543 MPN MS27488-20Electrical Connector End Seal Plug
- 1560-01-659-0276 MPN 520-14082-2Aircraft Structural Component Support
- 5305-00-005-0631 MPN NAS1509-22Close Tolerance Screw
- 5305-00-113-6205 MPN NAS1221-6-12Machine Screw
- 5305-00-137-1444 MPN NAS1351C3-28Socket Head Cap Screw
- 5305-00-144-0344 MPN MS24671-1Socket Head Cap Screw
- 5305-00-150-0810 MPN NAS1100C08-46PMachine Screw
- 5305-00-157-5705 MPN NAS1081C8A10LSetscrew
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-572-6839 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS2816C23 | National Aerospace Standards |