NSN 5306-01-572-9525
Coaxial Connector
1.563 inches fastener length, dished hexagon head style, between 0.156 inches and 0.171 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number NAS1105-19W for national stock number 5306015729525.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-572-9525.
-
MPN or Model
NAS1105-19W
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.375 inches -
Fastener Length
1.563 inches -
Head Style
Dished hexagon -
Head Height
Between 0.156 inches and 0.171 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Grip Diameter
Between 0.311 inches and 0.312 inches -
Thread Diameter
0.312 inches -
Grip Length
1.188 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel comp 8740 or steel comp 4140 or steel comp 4340 or steel comp 8735 or steel comp 6150 -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, ty1, cl3 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-259-8456 MPN NAS1464-028-02CStud Terminal
- 5940-01-451-3030 MPN NAS1063A10-105BUTerminal Board Marker Strip
- 5305-00-001-4755 MPN NAS1020-48AHexagon Head Cap Screw
- 5305-00-008-3672 MPN NAS1100E08-24Machine Screw
- 5305-00-043-2693 MPN MS24693-S292Machine Screw
- 5305-00-052-3618 MPN NAS1633C3Machine Screw
- 5305-00-057-0528 MPN MS51958-46Machine Screw
- 5305-00-177-5325 MPN NAS1218-08-2Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-572-9525 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1105-19W | National Aerospace Standards |