NSN 5306-01-573-1313
Coaxial Connector
Hexagon head style, 0.312 inches head height, between 0.928 inches and 0.940 inches width between flats, thread diameter: 0.625 inches.
Manufacturer part number NAS6610-98 for national stock number 5306015731313.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-573-1313.
-
MPN or Model
NAS6610-98
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Direction
Right-hand -
Head Style
Hexagon -
Head Height
0.312 inches -
Width Between Flats
Between 0.928 inches and 0.940 inches -
End Application
1520-01-035-0266 helicopter, utility, uh-60, rotary wing aircraft -
Thread Diameter
0.625 inches -
Thready Qty Per Inch (tpi)
18 -
Material
Steel -
Thread Series Designator
Unj
More from these suppliers
- 1680-00-340-0045 MPN NAS164Control Whee Insert
- 5935-00-817-9981 MPN NAS714-15Electrical Receptacle Connector
- 5940-01-394-5134 MPN NAS707S1Stud Terminal
- 5940-01-425-7387 MPN NAS1063C8-319Terminal Board Marker Strip
- 5305-00-005-0582 MPN NAS5903-10Machine Screw
- 5305-00-068-0537 MPN NAS609C3H14Socket Head Cap Screw
- 5305-00-071-1766 MPN NASM90725-123Hexagon Head Cap Screw
- 5305-00-165-8025 MPN NAS1189-06P8Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-573-1313 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6610-98 | National Aerospace Standards |