NSN 5306-01-573-2297
Coaxial Connector
4.389 inches fastener length, double hexagon extended washer head style, 0.808 inches head height, width between flats: 0.937 inches .
Manufacturer part number NASM21250-14050 for national stock number 5306015732297.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-573-2297.
-
MPN or Model
NASM21250-14050
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.244 inches -
Fastener Length
4.389 inches -
Head Style
Double hexagon extended washer -
Head Height
0.808 inches -
Width Between Flats
0.937 inches -
Extended Washer Diameter
Between 1.428 inches and 1.438 inches -
Extended Washer Thickness
0.198 inches -
Grip Diameter
Between 0.873 inches and 0.874 inches -
End Application
C-130 aircraft -
Thread Diameter
0.875 inches -
Grip Length
3.125 inches -
Thready Qty Per Inch (tpi)
14 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Material
Steel comp 4140 -
Material Specification
Mil-s-5626 military specification single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type ii.Class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-381-7272 MPN NAS1063B168-179Terminal Board Marker Strip
- 5940-01-425-6508 MPN NAS1063A5-443Terminal Board Marker Strip
- 5940-01-425-6525 MPN NAS1063A14-403Terminal Board Marker Strip
- 5305-00-019-9461 MPN NAS1014-23AHexagon Head Cap Screw
- 5305-00-054-2266 MPN MS24678-60Socket Head Cap Screw
- 5305-00-069-5583 MPN MS90725-99Hexagon Head Cap Screw
- 5305-00-079-2575 MPN NAS1100-4-7Machine Screw
- 5305-00-119-7445 MPN NAS1635-08LE14Socket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-573-2297 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NASM21250-14050 | National Aerospace Standards |