NSN 5306-01-575-9050
Close Tolerance Hex Head Bolt
Between 0.448 inches and 0.478 inches fastener length, fillister countersunk head style, between 0.339 inches and 0.381 inches head diameter, head height: 0.083 inches .
Manufacturer part number NAS1790-3R2 for national stock number 5306015759050.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-575-9050.
-
MPN or Model
NAS1790-3R2
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.338 inches -
Fastener Length
Between 0.448 inches and 0.478 inches -
Head Style
Fillister countersunk -
Head Diameter
Between 0.339 inches and 0.381 inches -
Head Height
0.083 inches -
Grip Diameter
0.189 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.110 inches and 0.140 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or ams 6415 assn standard 2nd material response or mil-s-6049 military specification 3rd material response -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-381-7092 MPN NAS1063B226-235Terminal Board Marker Strip
- 5940-01-444-8253 MPN NAS1063A9-141CTerminal Board Marker Strip
- 5940-01-451-2581 MPN NAS1063A6-510AZTerminal Board Marker Strip
- 5940-01-384-3924 MPN NAS1063C5TB177ATerminal Board Marker Strip
- 5940-01-384-3955 MPN NAS1063A20TB42CTerminal Board Marker Strip
- 5305-00-051-4495 MPN MS51973-17Setscrew
- 5305-00-052-6879 MPN MS24627-55Tapping Screw
- 5305-00-089-0269 MPN NAS1352-04-6PSocket Head Cap Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-575-9050 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1790-3R2 | National Aerospace Standards |