NSN 5306-01-576-3320
Coaxial Connector
1.490 inches fastener length, double hexagon w/hole head style, between 0.290 inches and 0.310 inches head height, width between flats: 0.306 mils.
Manufacturer part number NAS1271-8 for national stock number 5306015763320.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-576-3320.
-
MPN or Model
NAS1271-8
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.485 inches -
Fastener Length
1.490 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.290 inches and 0.310 inches -
Width Between Flats
0.306 mils -
Extended Washer Diameter
0.428 mils and 0.438 centimeters -
Extended Washer Thickness
Between 0.059 inches and 0.079 inches -
Grip Diameter
0.500 inches -
End Application
Nimrod 2000 -
Thread Diameter
0.250 inches -
Grip Length
0.985 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Titanium alloy uns r56400 -
Material Specification
Nas4004 6al4v assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-00-525-4454 MPN NAS25-3LTrunnion Tank Strap
- 5940-01-399-8069 MPN NAS1063B-1-14Terminal Board Marker Strip
- 5940-01-443-8866 MPN NAS1063Terminal Board Marker Strip
- 5935-01-597-0336 MPN E0762F17-08LSpec Backshell
- 5940-01-451-4001 MPN NAS1063A10-105BSTerminal Board Marker Strip
- 5305-00-007-2952 MPN NAS1100C02-2Machine Screw
- 5305-00-052-5964 MPN MS35202-2Machine Screw
- 5305-00-054-9245 MPN MS24694C106Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-576-3320 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1271-8 | National Aerospace Standards |