NSN 5306-01-576-4072
Coaxial Connector
Between 1.516 inches and 1.546 inches fastener length, between 0.141 inches and 0.171 inches head height, 0.492 mils and 0.502 centimeters width between flats, grip diameter: 0.311 mils and 0.312 centimeters.
Manufacturer part number NAS6805A17D for national stock number 5306015764072.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-576-4072.
-
MPN or Model
NAS6805A17D
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.469 inches -
Fastener Length
Between 1.516 inches and 1.546 inches -
Head Height
Between 0.141 inches and 0.171 inches -
Width Between Flats
0.492 mils and 0.502 centimeters -
Grip Diameter
0.311 mils and 0.312 centimeters -
Shank Unthreaded Hole Diameter
0.066 mils and 0.086 centimeters -
Thread Diameter
0.313 inches -
Grip Length
1.052 mils and 1.072 centimeters -
Thready Qty Per Inch (tpi)
24 -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.351 inches -
Part Name Assigned By Controlling Agency
Bolt, tension, hex head, close tolerance, 6al-4v titanium alloy, long thread, reduced major thread dia, nonlocking, 160 ksiftu -
Material
Titanium alloy uns r56400 -
Material Specification
Ams4928 assn standard single material response or ams4967 assn standard single material response -
Surface Treatment
Aluminum -
Surface Treatment Specification
Nas4006 national std/spec single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 4920-01-064-2592 MPN NAS578A10Test Stand Retainer
- 5940-01-425-7396 MPN NAS1063A11-337Terminal Board Marker Strip
- 1680-01-532-3050 MPN NAS76A6-009NAirc Sleeve Bushing
- 5940-01-666-5991 MPN NAS1063Terminal Board Marker Strip
- 5305-00-007-0286 MPN NAS1100E3-8PMachine Screw
- 5305-00-057-0522 MPN MS51958-26Machine Screw
- 5305-00-057-0538 MPN MS51958-56Machine Screw
- 5305-00-057-2601 MPN MS51038-129Setscrew
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-576-4072 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6805A17D | National Aerospace Standards |