NSN 5306-01-577-1667
Coaxial Connector
Item has drilled shank bolt.
Manufacturer part number NAS6206-39D for national stock number 5306015771667.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-577-1667.
-
MPN or Model
NAS6206-39D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.454 inches -
Fastener Length
2.892 inches -
Head Style
Dished hexagon -
Head Height
0.188 mils and 0.203 centimeters -
Width Between Flats
Between 0.554 inches and 0.564 inches -
Grip Diameter
Between 0.373 inches and 0.374 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.116 inches first hole -
Thread Diameter
0.375 inches -
Grip Length
Between 2.428 inches and 2.448 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Part Name Assigned By Controlling Agency
Bolt tension hex head close tolerance alloy steel short thread reduced major thread dia. Self locking and non locking 160 ksi ftu -
Material
Steel comp e4340 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-354-9982 MPN NAS1063A12-1000Terminal Board Marker Strip
- 5940-01-361-4676 MPN NAS1063E6-6Terminal Board
- 5940-01-451-4311 MPN NAS1744-1Conductor Splice
- 5940-01-666-3448 MPN NAS1063C3-608RATerminal Board Marker Strip
- 5305-00-004-3129 MPN NAS1190E04P15LSocket Head Cap Screw
- 5305-00-004-3129 MPN NAS1190C04P15LSocket Head Cap Screw
- 5305-00-021-4078 MPN NAS1221-3-3Machine Screw
- 5305-00-151-5665 MPN NAS560HK2P12Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-577-1667 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6206-39D | National Aerospace Standards |