NSN 5306-01-577-1802
Coaxial Connector
Item has drilled shank bolt with undrilled head non locking.
Manufacturer part number NAS6604D71 for national stock number 5306015771802.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-577-1802.
-
MPN or Model
NAS6604D71
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.425 inches -
Fastener Length
4.863 inches -
Head Style
Dished hexagon -
Head Height
0.125 mils and 0.140 centimeters -
Width Between Flats
Between 0.429 inches and 0.439 inches -
Grip Diameter
Between 0.248 inches and 0.249 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Thread Diameter
0.250 inches -
Grip Length
Between 4.428 inches and 4.448 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Part Name Assigned By Controlling Agency
Bolt tension hex head close tolerance alloy steel long thread reduced major dia. Self locking and non locking 160 ksi ftu -
Material
Steel comp e4340 or steel comp 8740 -
Surface Treatment
Cadmium or chromate -
Thread Series Designator
Unjf
More from these suppliers
- 1680-00-860-0633 MPN NAS1211G10Tie Down St Fitting
- 5305-00-007-6178 MPN NAS1100E02-13Machine Screw
- 5305-00-052-7469 MPN MS35198-100Machine Screw
- 5305-00-059-3086 MPN MS24694-S103Machine Screw
- 5305-00-068-5838 MPN MS24678-36CSocket Head Cap Screw
- 5305-00-121-2420 MPN NAS1352-4LL8PSocket Head Cap Screw
- 5305-00-144-0376 MPN NAS662C2LLR3Socket Head Cap Screw
- 5305-00-163-6802 MPN NAS1121C15Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-577-1802 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6604D71 | National Aerospace Standards |