NSN 5306-01-577-5602
Coaxial Connector
.2500-28 thread unjf-3a.
Manufacturer part number NAS6704D20 for national stock number 5306015775602.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-577-5602.
-
MPN or Model
NAS6704D20
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.425 inches -
Fastener Length
1.675 inches -
Head Style
Dished hexagon -
Head Height
0.125 inches -
Width Between Flats
Between 0.429 inches and 0.439 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole -
Thread Diameter
0.2500 inches -
Grip Length
1.250 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.497 inches first hole -
Color
Green threads -
Material
Plastic polyamide locking feature -
Surface Treatment
Cadmium and chromate fastener -
Thread Series Designator
Unjf
More from these suppliers
- 1560-01-571-8130 MPN NAS1677D29W37NAir Retaining Strap
- 5305-00-005-0629 MPN NAS1190E04P6LSocket Head Cap Screw
- 5305-00-006-2410 MPN MS51105-412Hexagon Head Cap Screw
- 5305-00-007-2943 MPN NAS1100C06-9PMachine Screw
- 5305-00-007-6179 MPN NAS1100C04-9Machine Screw
- 5305-00-042-9478 MPN MS90725-90Hexagon Head Cap Screw
- 5305-00-052-6922 MPN MS24629-58Tapping Screw
- 5305-00-057-0512 MPN MS51958-15Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-577-5602 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6704D20 | National Aerospace Standards |