NSN 5306-01-579-2801
Wheel Bolt
Between 0.740 inches and 0.760 inches fastener length, hexagon head style, 0.188 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number MS9491-08 for national stock number 5306015792801.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-579-2801.
-
MPN or Model
MS9491-08
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.694 inches and 0.734 inches -
Fastener Length
Between 0.740 inches and 0.760 inches -
Head Style
Hexagon -
Head Height
0.188 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 0.088 inches and 0.108 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
130000 pounds per square inch -
Hardness Rating
24.0 rockwell c and 35.0 rockwell c -
Minimum Yield Strength
85000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5930-00-044-3518 MPN MS27407-6Toggle Switch
- 5930-00-050-2672 MPN MS35058-1Toggle Switch
- 5935-00-081-3747 MPN MS3124E22-41SWElectrical Receptacle Connector
- 5935-00-083-5602 MPN MS17348R28C21PElectrical Receptacle Connector
- 5935-00-089-2097 MPN MS3116F10-6SElectrical Plug Connector
- 5905-00-110-0196 MPN MS35034-87Composition Fixed Resistor
- 5940-00-115-5023 MPN MS20659-124Lug Terminal
- 5935-00-159-6892 MPN MS27473E18B35SAElectrical Plug Connector
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-579-2801 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS9491-08 | Military Standards |
MS9491-08 | Military Standards |