NSN 5306-01-579-3983
Coaxial Connector
Has drilled shank, 0.046 in, dia. Hole centered 0.178 in. From screw end.
Manufacturer part number NAS6704D54 for national stock number 5306015793983.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-579-3983.
-
MPN or Model
NAS6704D54
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.425 inches -
Fastener Length
Between 3.785 inches and 3.815 inches -
Head Style
Dished hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.429 inches and 0.439 inches -
Grip Diameter
Between 0.249 inches and 0.250 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 3.650 inches and 3.850 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Part Name Assigned By Controlling Agency
Bolt, tension, hex head, close tolerance, a286 cres, long thread, reduced major thread dia., nonlocking, 160 ksi ftu -
Material
Stainless steel -
Material Specification
Uns662286 iaw ams5731, ams5732, ams 5737 or ams5835 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Ams2700, method 1, type 2 or type 8, class assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-01-623-0443 MPN 520-14944-2Aircraft Stringer
- 5305-00-008-5896 MPN NAS1102E5-10Machine Screw
- 5305-00-045-1988 MPN MS90725-87Hexagon Head Cap Screw
- 5305-00-068-5412 MPN NAS1352C02H8Socket Head Cap Screw
- 5305-00-085-3226 MPN MS3212-34Machine Screw
- 5305-00-115-9358 MPN NAS514P440-9Machine Screw
- 5305-00-141-6282 MPN NAS1191E04P18LSocket Head Cap Screw
- 5305-00-150-3400 MPN NAS662C3R2Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-579-3983 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6704D54 | National Aerospace Standards |
NAS6704D54 | National Aerospace Standards |
NAS6704D54 | National Aerospace Standards |
NAS6704D54 | National Aerospace Standards |
NAS6704D54 | National Aerospace Standards |
NAS6704D54 | National Aerospace Standards |