NSN 5306-01-579-5634
Coaxial Connector
3.49 inches fastener length, dished hexagon head style, 0.125 inches head height, width between flats: between 0.429 inches and 0.439 inches .
Manufacturer part number NAS6704D49 for national stock number 5306015795634.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-579-5634.
-
MPN or Model
NAS6704D49
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.425 inches -
Fastener Length
3.49 inches -
Head Style
Dished hexagon -
Head Height
0.125 inches -
Width Between Flats
Between 0.429 inches and 0.439 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole -
End Application
Nimrod 2000 air reconnaisance -
Thread Diameter
0.2500 inches -
Grip Length
3.06 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
3.310 inches first hole -
Color
Green threads -
Material
Iron alloy 660 -
Surface Treatment
Cadmium and chromate -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-520-8570 MPN NAS1641R12T12SNElectrical Receptacle Connector
- 5940-01-432-4403 MPN NAS1063A16-507DTerminal Board Marker Strip
- 5305-00-006-8306 MPN NAS1100E06-4PMachine Screw
- 5305-00-008-5890 MPN NAS1102E08-14Machine Screw
- 5305-00-008-5908 MPN NAS1189C04T4LSocket Head Cap Screw
- 5305-00-052-8874 MPN MS24630-1Tapping Screw
- 5305-00-052-8907 MPN MS24630-61Tapping Screw
- 5305-00-066-7322 MPN NASM24694-C52Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-579-5634 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6704D49 | National Aerospace Standards |
NAS6704D49 | Linread Northbridge Aircraft |
NAS6704D49 | Pattonair Ltd |