NSN 5306-01-580-5884
Close Tolerance Hex Head Bolt
0.620 inches fastener length, dished hexagon head style, between 0.125 inches and 0.140 inches head height, width between flats: between 0.429 inches and 0.439 inches .
Manufacturer part number NAS6304PU4H for national stock number 5306015805884.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-580-5884.
-
MPN or Model
NAS6304PU4H
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.370 inches -
Fastener Length
0.620 inches -
Head Style
Dished hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.429 inches and 0.439 inches -
Hole Diameter
0.046 inches -
Locking Feature
Patch threads -
Grip Diameter
0.249 inches -
Thread Diameter
0.250 inches -
Grip Length
0.250 inches -
Hole Quantity
3 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hole Configuration Style
Hexagon corners -
Material
Plastic polyamide locking feature -
Material Specification
Ams 5731 assn standard single material response or ams 5732 assn standard single material response or ams 5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Ams 2700, method 1, ty2 or ty8, cl1 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-384-3944 MPN NAS1063A2TB107ACTerminal Board Marker Strip
- 5940-01-413-3009 MPN NAS1063B238-248Terminal Board Marker Strip
- 5940-01-451-4407 MPN NAS1063A10-105BVTerminal Board Marker Strip
- 5935-01-323-4639 MPN MS33684-18-10PElectrical Connector Insert
- 5935-00-111-1891 MPN NAS1665-14Electrical Connector Backshell
- 5305-00-019-9461 MPN NAS1014-23AHexagon Head Cap Screw
- 5305-00-055-5781 MPN MS24677-62Socket Head Cap Screw
- 5305-00-057-0522 MPN MS51958-26Machine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-580-5884 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6304PU4H | National Aerospace Standards |
Stock Check
- NE: 196
- NS: 166