NSN 5306-01-580-6089
Coaxial Connector
Between 8.021 inches and 8.071 inches fastener length, double hexagon w/hole head style, between 0.420 inches and 0.440 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number BACB30LE7K111 for national stock number 5306015806089.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-580-6089.
-
MPN or Model
BACB30LE7K111
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.728 inches and 0.738 inches -
Fastener Length
Between 8.021 inches and 8.071 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.420 inches and 0.440 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Extended Washer Diameter
Between 0.723 inches and 0.743 inches -
Extended Washer Thickness
Between 0.099 inches and 0.109 inches -
Grip Diameter
Between 0.4672 inches and 0.4682 inches -
Thread Diameter
0.4375 inches -
Grip Length
Between 6.928 inches and 6.948 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
200000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Stainless steel -
Material Specification
Ams 5737 assn standard single material response -
Surface Treatment Specification
Bms10-85, type 1, class b assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-00-056-6162 MPN 5-87405-14 Mechanism Assembly
- 1560-00-251-7056 MPN 50-9788-34Aircraft Rudder
- 4920-00-257-7156 MPN 9PRE65B00161-1Aircraft Maintenance Fixture
- 1560-00-327-0745 MPN 9-62570-2Outboard Cove Track
- 1560-00-340-9245 MPN 5-87157-4Aircraft Trim Tab
- 4920-00-342-4017 MPN F66026Electrical-electronic Equipment Test Station
- 1560-00-564-2512 MPN 5-73115-41Aircraft Leading Edge
- 1560-00-611-8909 MPN 50-3309-3Landing Gear Cont Lever Assembly
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
![Mechanic Bill explains Coaxial Connector](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5306-01-580-6089 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LE7K111 | The Boeing Company |
Stock Check
![](/public/images/partscage_shelf3.png)