NSN 5306-01-580-6098
Coaxial Connector
Between 2.770 inches and 2.820 inches fastener length, double hexagon w/hole head style, between 0.330 inches and 0.350 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number BACB30LE6K29 for national stock number 5306015806098.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-580-6098.
-
MPN or Model
BACB30LE6K29
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.638 inches and 0.648 inches -
Fastener Length
Between 2.770 inches and 2.820 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.330 inches and 0.350 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Extended Washer Diameter
Between 0.639 inches and 0.649 inches -
Extended Washer Thickness
Between 0.081 inches and 0.101 inches -
Grip Diameter
Between 0.3896 inches and 0.3901 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 1.678 inches and 1.698 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
200000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Stainless steel -
Material Specification
Ams 5737 assn standard single material response -
Surface Treatment Specification
Bms10-85, type 1, class b assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-00-021-6750 MPN 114E4020-3Li Modification Kit
- 1560-00-028-8056 MPN 8-6712-4Hinge Door Assembly
- 1560-00-073-1038 MPN 107S8352-1Aircraft Door
- 1680-00-073-5614 MPN 107C2201-1Control Pedal
- 5935-00-153-3909 MPN 204-19099-2Electrical Receptacle Connector
- 1560-00-185-5970 MPN 3-47301Cable Adjustment Fitting
- 1560-00-233-1119 MPN 50-6237-3043Elevator Balance Weight
- 1560-00-332-2732 MPN 9-65876Wing Strut Assembly
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-580-6098 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LE6K29 | The Boeing Company |