NSN 5306-01-580-6317
Coaxial Connector
Between 3.374 inches and 3.419 inches fastener length, dished hexagon head style, between 0.125 inches and 0.140 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number BACB30NR4HK46 for national stock number 5306015806317.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-580-6317.
-
MPN or Model
BACB30NR4HK46
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.384 inches and 0.394 inches -
Fastener Length
Between 3.374 inches and 3.419 inches -
Head Style
Dished hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.248 inches and 0.249 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 2.865 inches and 2.885 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
95000 pounds per square inch -
Surface Finish
63.0 microinches bearing surface of head -
Material
Titanium alloy -
Material Specification
Ams 4928 assn standard single material response or ams 4967 assn standard single material response -
Surface Treatment
Aluminum -
Surface Treatment Specification
Bms10-85, type 1, class a assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-012-4639 MPN 114S2551-31Aircraft Floor
- 1560-00-019-4410 MPN 65-2270-6Sidewall Cockpit Trim
- 1560-00-073-1124 MPN A02S1002-5Door Assembly
- 1680-00-076-7775 MPN 66-19768-1Mounting Stud Tie
- 4920-00-253-3807 MPN 3TE65B92203Wing Plug Assembly
- 1560-00-312-9585 MPN 4-4438-21Aircraft Structural Plate
- 1560-00-418-8676 MPN 65-48140-3Drain Assembly
- 1560-00-570-4151 MPN 50-9588-2Fuel Hydraulic Fitting
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-580-6317 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30NR4HK46 | The Boeing Company |