NSN 5306-01-580-6433
Coaxial Connector
Between 1.345 inches and 1.390 inches fastener length, dished hexagon head style, between 0.156 inches and 0.171 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number BACB30NR5K12 for national stock number 5306015806433.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-580-6433.
-
MPN or Model
BACB30NR5K12
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.449 inches and 0.459 inches -
Fastener Length
Between 1.345 inches and 1.390 inches -
Head Style
Dished hexagon -
Head Height
Between 0.156 inches and 0.171 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Grip Diameter
Between 0.310 inches and 0.312 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 0.740 inches and 0.760 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
95000 pounds per square inch -
Surface Finish
63.0 microinches bearing surface of head -
Material
Titanium alloy -
Material Specification
Ams 4928 assn standard single material response or ams 4967 assn standard single material response -
Surface Treatment
Aluminum -
Surface Treatment Specification
Bms10-85, type 1, class a assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-00-056-6162 MPN 5-87405-16 Mechanism Assembly
- 1680-00-070-6313 MPN 65-32872-3Rearview Mirror Assembly
- 4920-00-181-6606 MPN F65931Aircraft Maintenance Fixture
- 1560-00-210-9012 MPN 6-39613-4Hinge Latch Handle Assembly
- 1680-00-217-4793 MPN 3-60257Actuator Signal Switch Guide
- 1560-00-303-7438 MPN 3-68678-3Aircraft Structural Component Support
- 1560-00-393-8877 MPN 3-39021-502Flush Handle Link
- 4920-00-409-7686 MPN TE65-73701-34Aircraft Maintenance Fixture
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
![Mechanic Bill explains Coaxial Connector](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5306-01-580-6433 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30NR5K12 | The Boeing Company |
Stock Check
![](/public/images/partscage_shelf3.png)