NSN 5306-01-580-6507
Coaxial Connector
Between 1.705 inches and 1.750 inches fastener length, dished hexagon head style, between 0.188 inches and 0.203 inches head height, width between flats: between 0.553 inches and 0.564 inches .
Manufacturer part number BACB30NR6K17 for national stock number 5306015806507.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-580-6507.
-
MPN or Model
BACB30NR6K17
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.465 inches and 0.475 inches -
Fastener Length
Between 1.705 inches and 1.750 inches -
Head Style
Dished hexagon -
Head Height
Between 0.188 inches and 0.203 inches -
Width Between Flats
Between 0.553 inches and 0.564 inches -
Grip Diameter
Between 0.373 inches and 0.374 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 1.052 inches and 1.072 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
95000 pounds per square inch -
Surface Finish
63.0 microinches bearing surface of head -
Material
Titanium alloy -
Material Specification
Ams 4928 assn standard single material response or ams 4967 assn standard single material response -
Surface Treatment
Aluminum -
Surface Treatment Specification
Bms10-85, type 1, class a assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-019-7155 MPN 35-16964-1Support Assembly
- 5940-00-113-9835 MPN BACT12AC36Lug Terminal
- 1680-00-251-9205 MPN 3-61122Univer Pin Assembly
- 1680-00-341-9426 MPN 9-60850-2 Actuating Cylinder
- 1560-00-568-3502 MPN 9-56441Aircraft Structural Component Support
- 1560-00-571-8391 MPN 50-3946-4Aircraft Access Cover
- 1560-00-606-7424 MPN 5-87851-150Wing Landing Flap
- 1560-00-611-7608 MPN 3-86461Combustion Chamber Seal
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
![Mechanic Bill explains Coaxial Connector](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5306-01-580-6507 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30NR6K17 | The Boeing Company |
Stock Check
![](/public/images/partscage_shelf3.png)