NSN 5306-01-581-3242
Close Tolerance Hex Head Bolt
49.5 millimeters fastener length, undercut hexagon head style, between 4.2 millimeters and 4.5 millimeters head height, width between flats: between 12.7 millimeters and 13.0 millimeters .
Manufacturer part number NA0036-085038 for national stock number 5306015813242.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-581-3242.
-
MPN or Model
NA0036-085038
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Direction
Right-hand -
Thread Length
11.5 millimeters -
Fastener Length
49.5 millimeters -
Head Style
Undercut hexagon -
Head Height
Between 4.2 millimeters and 4.5 millimeters -
Width Between Flats
Between 12.7 millimeters and 13.0 millimeters -
Grip Diameter
Between 8.4 millimeters and 8.5 millimeters -
Thread Diameter
8.0 millimeters -
Grip Length
Between 37.8 millimeters and 38.2 millimeters -
Thread Pitch In Millimeters
1.0 -
Material
Steel comp e4340 or steel comp 8740 -
Thread Series Designator
Mj
More from these suppliers
- 5935-01-067-0916 MPN NAS1653REV2Electrical Plug Connector
- 5940-01-125-5487 MPN NAS1063A6-2Terminal Board Marker Strip
- 5305-00-007-6174 MPN NAS1100E00-10Machine Screw
- 5305-00-008-5886 MPN NAS1102E06-8PMachine Screw
- 5305-00-046-9796 MPN NAS514P1032-11PMachine Screw
- 5305-00-051-4133 MPN MS24694C93Machine Screw
- 5305-00-099-7839 MPN NAS1351-4H8PSocket Head Cap Screw
- 5305-00-143-3230 MPN NAS1352-16LE44PSocket Head Cap Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-581-3242 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NA0036-085038 | National Aerospace Standards |