NSN 5306-01-581-4852
Coaxial Connector
Between 1.405 inches and 1.435 inches fastener length, dished hexagon head style, between 0.190 inches and 0.210 inches head height, width between flats: between 0.243 inches and 0.251 inches .
Manufacturer part number BACB30MR3AH14 for national stock number 5306015814852.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-581-4852.
-
MPN or Model
BACB30MR3AH14
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.340 inches and 0.350 inches -
Fastener Length
Between 1.405 inches and 1.435 inches -
Head Style
Dished hexagon -
Head Height
Between 0.190 inches and 0.210 inches -
Width Between Flats
Between 0.243 inches and 0.251 inches -
Grip Diameter
Between 0.1881 inches and 0.1895 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.865 inches and 0.885 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
200000 pounds per square inch -
Surface Finish
63.0 microinches bearing surface of head -
Material
Titanium alloy -
Material Specification
Ams 4928 assn standard single material response or ams 4967 assn standard single material response -
Surface Treatment
Aluminum -
Surface Treatment Specification
Bms 10-85, type 1 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-070-6536 MPN 65-33397-1Clevis Block
- 1560-00-073-2527 MPN 107S7420-1Fitting Assembly
- 1560-00-073-4247 MPN A02E4045-13Heat And Vent Duct
- 1560-00-327-0682 MPN 6-73133Flap Drive P Sleeve
- 1560-00-328-1062 MPN 5-96764-1Ruddevator Drum Assembly
- 1560-00-328-1063 MPN 5-96764-2Ruddevator Drum Assembly
- 1560-00-328-1064 MPN 5-97094-3Valve Bracket Assembly
- 1560-00-391-7251 MPN 69-1875Aircraft Structural Plate
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
![Mechanic Bill explains Coaxial Connector](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5306-01-581-4852 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30MR3AH14 | The Boeing Company |
Stock Check
![](/public/images/partscage_shelf3.png)