NSN 5306-01-581-5654
Coaxial Connector
Between 1.285 inches and 1.340 inches fastener length, dished hexagon head style, between 0.125 inches and 0.140 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number BACB30LM4-12 for national stock number 5306015815654.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-581-5654.
-
MPN or Model
BACB30LM4-12
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.420 inches and 0.430 inches -
Fastener Length
Between 1.285 inches and 1.340 inches -
Head Style
Dished hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.740 inches and 0.760 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Part Name Assigned By Controlling Agency
Bolt, hex head, 160 ksi min tensile, long thread, a286, nonlocking, -
Material
Stainless steel -
Material Specification
Ams 5737 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Amsqq-p-416, type 2, cl 2 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-073-1126 MPN A02S1002-9Door Assembly
- 1680-00-341-9425 MPN 9-60484-3Seat Pulley And Pin
- 1560-00-440-9581 MPN 69-10063-1Adjustment Rudder Weight
- 1680-00-567-5893 MPN 107S2201-72Copilot Con Support
- 1560-00-605-4684 MPN 50-1583-58Fuel Tank Vent Outlet Assembly
- 1560-00-631-7588 MPN 36-2870Pilot Chute Support Pin
- 1560-00-632-2363 MPN 66-11017Rod End Assembly
- 1560-00-646-6469 MPN 10-60031-15Door Seal Assembly
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
![Mechanic Bill explains Coaxial Connector](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5306-01-581-5654 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LM4-12 | The Boeing Company |
Stock Check
![](/public/images/partscage_shelf3.png)