NSN 5306-01-581-5723
Coaxial Connector
Between 1.410 inches and 1.455 inches fastener length, dished hexagon head style, between 0.125 inches and 0.140 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number BACB30LM4U14 for national stock number 5306015815723.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-581-5723.
-
MPN or Model
BACB30LM4U14
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.420 inches and 0.430 inches -
Fastener Length
Between 1.410 inches and 1.455 inches -
Head Style
Dished hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.865 inches and 0.885 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Part Name Assigned By Controlling Agency
Bolt, hex head, 160 ksi min tensile, long thread, a286, nonlocking, -
Material
Stainless steel -
Material Specification
Ams 5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Ams 2700, type 2 or type 8 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-078-6397 MPN 65-2269-2Cockpit Aft Sidewall Trim
- 1560-00-136-1731 MPN 5-85654-28Aircraft Fairing
- 1560-00-213-4017 MPN 9-21002-3Nacelle Cowling Latch Assembly
- 4920-00-255-3707 MPN MIT65-51515-1Aircraft Maintenance Fixture
- 1560-00-325-1371 MPN 5-73134-1650Wing Aileron Spacer
- 1680-00-349-4699 MPN 90-3590Ac Gear And Bearing
- 1560-00-475-8572 MPN 25-5240-501Aircraft Strut
- 1680-00-511-4709 MPN 50-7332-2Aircraft Gearbox Assembly
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-581-5723 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LM4U14 | The Boeing Company |