NSN 5306-01-581-6506
Coaxial Connector
Between 1.407 inches and 1.452 inches fastener length, dished hexagon head style, between 0.156 inches and 0.171 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number BACB30LJ5K13 for national stock number 5306015816506.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-581-6506.
-
MPN or Model
BACB30LJ5K13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.449 inches and 0.459 inches -
Fastener Length
Between 1.407 inches and 1.452 inches -
Head Style
Dished hexagon -
Head Height
Between 0.156 inches and 0.171 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Grip Diameter
Between 0.3106 inches and 0.3120 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
95000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Part Name Assigned By Controlling Agency
Bolt, hex head, 95 ksi shear, short thread, a286, nonlocking -
Material
Stainless steel -
Material Specification
Ams 5737 assn standard single material response or ams 5853 assn standard single material response -
Surface Treatment
Aluminum -
Surface Treatment Specification
Bms10-85, type 1, class a assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-073-3982 MPN A02E2031-17Cover Assembly
- 1560-00-075-6282 MPN 69-10865-803Aircraft Structural Component Support
- 5945-00-259-4321 MPN 10-312Electrical Solenoid
- 5905-00-329-5320 MPN BACR14CH5R000CFInductive Wire Wound Fixed Resistor
- 1560-00-334-5898 MPN 5-97628Spoiler Support Arm
- 1680-00-397-0217 MPN 9-25657Slid Support Spider
- 1560-00-513-1892 MPN 3-69434-2Latch Arm Adjusting Shaft
- 1680-00-605-9696 MPN 5-48700-60Aircraft Gearbox Assembly
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
![Mechanic Bill explains Coaxial Connector](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5306-01-581-6506 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LJ5K13 | The Boeing Company |
Stock Check
![](/public/images/partscage_shelf3.png)