NSN 5306-01-582-2125
Close Tolerance Bolt
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-582-2125.
-
MPN or Model
AN176C20
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment)
More from these suppliers
- 5305-00-063-5043 MPN AN565F428H24Setscrew
- 5305-00-150-9457 MPN AN502-6-8Machine Screw
- 5305-00-151-0110 MPN AN507-1024R7Machine Screw
- 5306-00-151-0163 MPN AN8-45Machine Bolt
- 5305-00-151-0827 MPN AN526C1032-10Machine Screw
- 5305-00-151-1313 MPN AN509-8R22REV2Machine Screw
- 5935-00-201-8370 MPN AN3106A20-15PElectrical Plug Connector
- 5306-00-206-0947 MPN AN101226Machine Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-582-2125 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN176C20 | Aeronautical Standards Group |