NSN 5306-01-582-3255
Close Tolerance Hex Head Bolt
3.280 inches fastener length, hexagon head style, between 0.220 inches and 0.235 inches head height, width between flats: between 0.617 inches and 0.627 inches .
Manufacturer part number MS27576-7-43 for national stock number 5306015823255.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-582-3255.
-
MPN or Model
MS27576-7-43
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Fastener Length
3.280 inches -
Head Style
Hexagon -
Head Height
Between 0.220 inches and 0.235 inches -
Width Between Flats
Between 0.617 inches and 0.627 inches -
Grip Diameter
Between 0.435 inches and 0.437 inches -
End Application
B-1b aircraft -
Thread Diameter
0.437 inches -
Grip Length
Between 2.688 inches and 2.704 inches -
Thready Qty Per Inch (tpi)
20 -
Part Name Assigned By Controlling Agency
Bolt, self-retaining, impedance type, 95 ksi fsu, hex head, 450 degrees f -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Ams-p-416, type ii, class 2 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-384-3892 MPN NAS1063A8TB98TTerminal Board Marker Strip
- 5935-00-959-6481 MPN NAS715-23BElectrical Receptacle Connector
- 5940-01-384-3924 MPN NAS1063C5TB177ATerminal Board Marker Strip
- 5940-01-451-4414 MPN NAS1063A20-500BBTerminal Board Marker Strip
- 5305-00-006-9408 MPN MS3212-5Machine Screw
- 5305-00-046-7439 MPN NAS1151E23Close Tolerance Screw
- 5305-00-130-7888 MPN NAS1505-10Close Tolerance Screw
- 5305-00-151-2724 MPN NASM7839Machine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-582-3255 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS27576-7-43 | National Aerospace Standards |
NASM27576-7-43 | National Aerospace Standards |