NSN 5306-01-582-8364
Coaxial Connector
Item has drilled head.
Manufacturer part number NAS6204-120H for national stock number 5306015828364.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-582-8364.
-
MPN or Model
NAS6204-120H
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.370 inches -
Fastener Length
7.870 inches -
Head Style
Dished hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.429 inches and 0.439 inches -
Grip Diameter
Between 0.248 inches and 0.249 inches -
End Application
1680-01-544-9008 -
Thread Diameter
0.250 inches -
Grip Length
7.500 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Part Name Assigned By Controlling Agency
Bolt tension hex head close tolerance alloy steel short thread reduced major thread dia, self locking and non locking, 160 ksi ftu (bolt shear) -
Material
Steel comp e4340 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-929-7202 MPN NAS1196-10Electrica Connector
- 5935-01-581-2487 MPN MS27488-20-2Electrical Connector End Seal Plug
- 5940-01-437-8564 MPN NAS1063A2-107CYTerminal Board Marker Strip
- 1680-00-226-0555 MPN NAS303-25-5133Arrestin Cable Assy
- 5940-01-384-3971 MPN NAS1063D2-2Terminal Board Marker Strip
- 5305-00-003-9266 MPN NAS514P1032-19Machine Screw
- 5305-00-005-0629 MPN NAS1190E04P6NSocket Head Cap Screw
- 5305-00-007-0285 MPN NAS1100E3-6PMachine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
![Mechanic Bill explains Coaxial Connector](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5306-01-582-8364 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6204-120H | National Aerospace Standards |
Stock Check
![](/public/images/partscage_shelf3.png)