NSN 5306-01-583-8374
Coaxial Connector
1.953 inches fastener length, hexagon head style, 0.250 inches head height, width between flats: between 0.741 inches and 0.752 inches .
Manufacturer part number NAS1108-24W for national stock number 5306015838374.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-583-8374.
-
MPN or Model
NAS1108-24W
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.453 inches -
Fastener Length
1.953 inches -
Head Style
Hexagon -
Head Height
0.250 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
Grip Diameter
Between 0.4985 inches and 0.4995 inches -
Thread Diameter
0.500 inches -
Grip Length
1.500 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type i, class 3 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-688-6003 MPN NAS707-2Stud Terminal
- 5940-01-443-8936 MPN NAS1063A5-199HTerminal Board Marker Strip
- 1680-01-524-1333 MPN NAS1375A04SB07Aircr Air Duct Hose
- 5305-00-001-4755 MPN NAS1020-48AHexagon Head Cap Screw
- 5305-00-007-9898 MPN NAS1102E06-6PMachine Screw
- 5305-00-046-9796 MPN NAS514P1032-11PMachine Screw
- 5305-00-051-5906 MPN NAS333C5Close Tolerance Screw
- 5305-00-051-9104 MPN MS24677-91Socket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
![Mechanic Bill explains Coaxial Connector](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5306-01-583-8374 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1108-24W | National Aerospace Standards |
Stock Check
![](/public/images/partscage_shelf3.png)
- NS: 25
- NE: 20