NSN 5306-01-585-4675
Close Tolerance Hex Head Bolt
0.823 inches fastener length, fillister countersunk head style, 0.303 inches head diameter, head height: 0.012 inches .
Manufacturer part number NAS4903U8 for national stock number 5306015854675.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-585-4675.
-
MPN or Model
NAS4903U8
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
Thread Direction
Right-hand -
Thread Length
0.323 inches -
Fastener Length
0.823 inches -
Head Style
Fillister countersunk -
Head Diameter
0.303 inches -
Head Height
0.012 inches -
Grip Diameter
Between 0.181 inches and 0.184 inches -
Thread Diameter
0.190 inches -
Grip Length
0.500 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Bolt 100 degrees reduced head, tri slot recess, close tolerance, 6al-4v titanium alloy short thread, nonlocking -
Material
Titanium alloy uns r56400 -
Material Specification
Ams 4928 assn standard single material response or ams 4967 assn standard single material response -
Thread Series Designator
Unf
More from these suppliers
- 5940-01-437-8564 MPN NAS1063A2-107CYTerminal Board Marker Strip
- 5940-01-451-4001 MPN NAS1063A10-105BSTerminal Board Marker Strip
- 5305-00-053-1108 MPN MS24621-1Tapping Screw
- 5305-00-057-0522 MPN NASM51958Machine Screw
- 5305-00-071-2499 MPN MS24694A96Machine Screw
- 5305-00-142-5040 MPN MS18063-17Setscrew
- 5305-00-225-4587 MPN MS24694A49Machine Screw
- 5305-00-225-9093 MPN MS90726-38Hexagon Head Cap Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-585-4675 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS4903U8 | National Aerospace Standards |