NSN 5306-01-585-5655
Close Tolerance Hex Head Bolt
Head has 3 drilled holes accross corners; threaded end has drilled hole, 0.106 - 0.116 in. Dia. 0.201 - 0.211 in. From end.
Manufacturer part number NAS6807A42D for national stock number 5306015855655.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-585-5655.
-
MPN or Model
NAS6807A42D
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.694 inches -
Fastener Length
Between 3.304 inches and 3.334 inches -
Head Style
Dished hexagon -
Head Height
Between 0.219 inches and 0.234 inches -
Width Between Flats
Between 0.678 inches and 0.690 inches -
Grip Diameter
Between 0.436 inches and 0.437 inches -
Thread Diameter
0.438 inches -
Grip Length
Between 2.615 inches and 2.635 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Titanium alloy -
Material Specification
Ams4928 or ams4967 assn standard single material response -
Surface Treatment
Aluminum -
Surface Treatment Specification
Nas4006 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-372-2501 MPN NAS1063B-21-40Terminal Board Marker Strip
- 5305-00-059-3657 MPN NASM51958Machine Screw
- 5305-00-067-9900 MPN NASM51861-60Tapping Screw
- 5305-00-079-7977 MPN MS24694S195Machine Screw
- 5305-00-141-6407 MPN NAS1191CE02P5Socket Head Cap Screw
- 5305-00-143-2328 MPN MS51045-51Setscrew
- 5305-00-143-9689 MPN NAS1146-12Close Tolerance Screw
- 5305-00-147-6175 MPN MS35214-106Machine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-585-5655 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6807A42D | National Aerospace Standards |