NSN 5306-01-585-6667
Coaxial Connector
No cotter pin hole in bolt.
Manufacturer part number NAS464P8A72 for national stock number 5306015856667.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-585-6667.
-
MPN or Model
NAS464P8A72
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.422 inches -
Fastener Length
4.922 inches -
Head Style
Hexagon -
Head Height
Between 0.234 inches and 0.266 inches -
Width Between Flats
Between 0.740 inches and 0.752 inches -
Grip Diameter
0.499 inches -
Single Shear Strength
18650 pounds per square inch -
Thread Diameter
0.500 inches -
Grip Length
4.500 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
9250 pounds per square inch -
Surface Finish
32.0 microinches grip -
Part Name Assigned By Controlling Agency
Bolt - shear, close tolerance -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type ii, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-103-6862 MPN 4152200-44Anti-ice Inlet Duct
- 1560-00-326-3177 MPN 4011327Fuselage Spar Link
- 1680-00-454-0796 MPN S1391-22Push-pull Control Assembly
- 1680-00-511-5056 MPN 4041561Bell Crank
- 1560-00-568-7405 MPN 4024606Aileron Actuator Arm Assembly
- 1560-00-809-0366 MPN 4154409-17Thrust Attenuato Paddle Assembly
- 1560-00-996-1303 MPN 4012158-2Antenna Housing Assembly
- 1680-01-587-9172 MPN 0719014-2Aircraft Seat
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
![Mechanic Bill explains Coaxial Connector](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5306-01-585-6667 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS464P8A72 | National Aerospace Standards |
NAS464P8A72 | Cessna Aircraft Company |
Stock Check
![](/public/images/partscage_shelf3.png)