NSN 5306-01-585-6679
Coaxial Connector
No cotter pin hole in bolt.
Manufacturer part number NAS464P9A16 for national stock number 5306015856679.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-585-6679.
-
MPN or Model
NAS464P9A16
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.500 inches -
Fastener Length
1.500 inches -
Head Style
Hexagon -
Head Height
0.281 inches -
Width Between Flats
Between 0.865 inches and 0.877 inches -
Grip Diameter
0.562 inches -
Single Shear Strength
23600 pounds per square inch -
Thread Diameter
0.563 inches -
Grip Length
1.000 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
11800 pounds per square inch -
Surface Finish
32.0 microinches grip -
Part Name Assigned By Controlling Agency
Bolt - shear, close tolerance -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type ii, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-160-4641 MPN 0732613-3-791Stabilizer Tip
- 1560-00-335-9733 MPN 0652126Hood Support Arm
- 1560-00-349-7374 MPN 0620100-6Aircraft Structural Component Support
- 1560-00-400-7817 MPN 0750161-36Exhaust Pipe
- 1560-00-933-0191 MPN 1422011-6Airfoil Rib
- 1680-01-587-3424 MPN 0719045-1Aircraft Seat Cushion Cover
- 1680-01-587-8888 MPN 0514212-18Pan Cover Assembly
- 1560-01-597-7372 MPN 0710703-3Aircraft Stringer
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-585-6679 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS464P9A16 | National Aerospace Standards |
NAS464P9A16 | Cessna Aircraft Company |
Stock Check
- NS: 9
- NE: 27